We proudly offer these trusted brands of Safety Toe work boots
and shoes. Click on the logos below to see our selection
of safety footwear from each brand.
Work Boot
Safety Information
ASTM F2413-05—This replaces ANSI Z41-PT99 as the
new international standard for protective footwear.
C/75 I/75 (Impact & Compression)—Safety
footwear that meets or exceeds ASTM requirements for impact and
compression, for example steel toe or composite toe safety
shoes.
CD (Conductive)—Designed for use in areas with
highly volatile materials.Made with materials and cements that offer no electrical
resistance; these shoes and boots prevent build-up of static electricity
and are completely grounded.Please note: these offer no protection in areas with highly charged
equipment or open circuits. Click on the icon to view our
Conductive footwear or search for keyword: CD
CT (Composite Toe)—A lightweight protective toe
cap for safety toe shoes and work boots that
meets or exceeds ASTM F2413-05 standard for protective footwear. Click
on the icon to view our Composite Toe footwear or
search for keyword: CT
EH (Electrical Hazard)—Designed for use in areas
with highly charged equipment or open circuts.This is a secondary protection
that is provided in dry conditions only.Protection deteriorates in wet
environments and after long-term wear. Please note: these should not be
worn in areas with micro-circuit hazards or static discharge. Click on the icon to view our Electrical
Hazard footwear or search for keyword: EH
HR (Heat Resistant)—The outsole on these safety shoes and
boots are designed to withstand high temperatures. Click on the icon to view our Heat Resistant footwear or search for
keyword: HR
INS (Insulated)—These boots and
shoes are insulated to protect the wearer in cold working
environments. See product description on each shoe for
specific cold tolerance levels. Click on the icon to view our
Insulated footwear or search for keyword: INS
LW (Lightweight Safety Toe)—A
lightweight metallic toe cap for safety toe shoes and work boots that
meets or exceeds ASTM F2413-05 standard for protective footwear.
Made from alloys or lightweight metals, these safety toe shoes
provide the protection of a steel-toe with the lightweight
comfort and convenience of a composite toe. Click on the icon
to view our Lightweight Saftey Toe footwear or search for
keyword: LW
MG (Metatarsal Guard)—Designed to protect the
instep area of the work boots for use in areas where there is increased
risk of injury to the instep (such as items falling or dropping onto the
top of the foot). Click on the icon to view our Met Guard footwear
or search for keyword: MG
NE (No Exposed Metal)—Designed
so that all exposed components of the work shoes or boots are
made non-metallic materials to prevent scratching or marking of
work surfaces. Components of the shoe that are not exposed
(such as Steel Toe Caps) may be metallic. Click on the icon
to view our No Exposed Metal footwear or search for keyword: NE
NM (Non-Metallic)—Work shoes and boots designed
with 100% non-metallic materials. These items are security-friendly. Click on the icon to view our
Non-Metallic footwear or search for keyword: NM
OR (Oil Resistant)—The
outsoles on these shoes and boots have been designed to meet or
exceed industry guidelines for sip resistance on surfaces
contaminated with oil. Click on the icon to view our Oil
Resistant footwear or search for keyword: OR
PR (Puncture Resistant)—Non-metallic insole that
resists punctures through the bottom of the shoe.These shoes & boots meet or
exceed ASTM F2413-05 standard for puncture resistance. Click on the icon to view our
Puncture Resistant footwear or search for keyword: PR
SD (Static Dissipating)—Designed for use in
areas where static electricity could be problematic.This type of footwear discharges
small charge into the walking surface, reducing accumulated static
electricity.Please note:
these should not be worn in areas with highly charged equipment or open circuits. Also replacing manufacturer's insole
could alter or eliminate SD properties of the footwear. Click on the icon to view our Static
Dissipating footwear or search for keyword: SD
SR (Slip Resistant)—Designed to keep you stable on your feet
in slippery conditions.These work boots and shoes are most often
tested on the Mark II and James Machines. Click on the icon to view our
Slip Resistant footwear or search for keyword: SR
ST (Steel Toe)—A steel protective toe cap for
safety shoes and work boots that meets or
exceeds ASTM F2413-05 standard for protective footwear. Click on the icon to view our
Steel Toe footwear or search for keyword: ST
WP (Waterproof)—Work shoes and boot constructed with
a combination of water resistant uppers and waterproof linings that keep
the foot dry in wet working conditions. Click on the icon to view our
Waterproof footwear or search for keyword: WP
Searching Hint: To search for
a work boot or shoe that features more than one of these safety
features, use a combination of codes. For example to find
a Steel Toe, Electrical Hazard, and Slip Resistant work boot or
shoe, search for ST EH SR. See the complete list of
searchable abbreviations below:
CD
Conductive
C/I75 All Safety Toe CT Composite Toe EH Electrical Hazard
HR Heat Resistant INS Insulated
LW
Lightweight Safety Toe
MG Metatarsal
Guard
NE No Exposed
Metal
NM
Non-Metallic
OR Oil
Resistant
PR
Puncture Resistant
SD Static
Dissipating
SR Slip
Resistant
ST Steel Toe
WP
Waterproof
